Spaguard Total Increaser (2 LB)
Price
SpaGuard Total Alkalinity Increaser stabilizes your hot tubs pH by balancing the total alkalinity. Proper TA (Total Alkalinity) helps buffer pH to minimize the risks of corrosion and scale.
Product Information:
100% sodium hydrogen carbonate
Raises total alkalinity
1 tablespoon per 100 gallons raises total alkalinity 25ppm
Eliminates 'ph bounce'
Helps prevent equipment and spa surface corrosion and damage.
Directions for use:
1. Apply appropriate amount of product per as measured by an accurate testing method
2. Broadcast into spa with the circulation system operating
3. Operate circulation system for 30 minutes after application
For more information on Spa Guard Products, please watch this informational video.
PRODUCT FAQ'S
The force and velocity of aerated water keeps water moving so the filter can remove suspended debris. Circulation also ensures that the chemicals are thoroughly distributed. Dead spots are usually not as prevalent in a spa as they are in a pool.
With the dirt, sweat and oils released in a spa, good filtration is essential. Cartridge filters are the typical choice and because of the increase in the amount of filterable debris, the filter should be regularly cleaned with a garden hose or chemically cleaned at refill.
Cleaning a spa involves several aspects of care, including the removal of obvious debris by skimming or vacuuming, and removal of body oils that are rinsed off bathers. Also, be sure to wipe surfaces after heavy use.
Bacteria and algae grow much faster in a spa than in a pool. As a result, spa owners need to follow a regular and complete chemical treatment routine. Spa chemistry includes water balance, sanitizer and oxidizer applications.
Fewer gallons of water mean changes in water balance happen faster. Add to this the aerated water, increased water temperature, and the heavier bather loads, and it’s easy to see the importance of regular testing. Adjust the balance and sanitizer levels as needed.
Sooner or later, the water reaches a point where it just gets “worn out” from the bather load. When the water looks bad, smells bad, and feels bad it’s time for a change. It is recommended that you drain and refill your spa with fresh water approximately every 3 months.
