Bioguard Pool Magnet Plus (1 qt)
Price
Pool Magnet Plus is a highly concentrated formula that removes some present stains and prevents staining from iron, copper and manganese. It also eliminates discolored water from metals. Use monthly in pools that hold metal containing fill water. Use in conjunction with Sparkle Up® to remove metals from the water.
Product Information:
pH 3.5
Prevents stains caused by metals
Removes fresh metal stains
Easy to apply
Concentrated formula
Use as needed
Directions for use:
1. Use 1 quart of Pool Magnet Plus per 10,000 gallons per 1ppm of metals
2. Add directly to your swimming pool in the area of any localized metal stains
3. Maximum recommended does is 3 quarts per 10,000 gallons
For Maintenance
1. When make-up water contains metals, add 3 fluid ounces per 1,000 gallons of water added to the swimming pool
Removal of Fresh Stains
1. Turn circulation off for 8 hours
2. Pour 1-3 quarts (depending on the severity of stains) of Pool Magnet Plus directly in the area of the stain
3. Do not swim or operate pump for 24 hours
4. After the waiting period, turn the pump on, circulate water continuously for 5 to 7 days and brush your swimming pool walls daily
For more information on Bio Guard Products, please watch this informational video.
PRODUCT FAQ'S
BioGuard® offers many solutions based on your individual needs. Your Dealer will make educated recommendations after performing a water sample test. BioGuard has products such as:
- Banish® to kill all types of swimming pool algae.
- Spot Kill® which is formulated to kill black algae on walls.
- Spot Kill WP which should only be used on white plaster pools is also formulated for killing black algae on walls.
Learn more about different algae types and suggested BioGuard treatments in our troubleshooting page.
Your best course of action is to take a water sample to your BioGuard Dealer. They can test your water and provide personalized instructions on the best corrective measures.
Some suggestions your dealer may provide are:
- Lo ‘N Slo® when pH is high.
- Strip Kwik® or Kleen It® when filter is dirty.
- Smart Shock®, Burn Out Extreme®, Burn Out® 35, or Easy Shock and Swim® for shocking when Free Available Chlorine level is low.
- Polysheen® Blue which is also an excellent water clarifier.
(Note: For BioGuard SoftSwim® pools, use SoftSwim Filter Aid and Flocculent.)
Sanitizing pool water kills bacteria that can be harmful to bathers and also aids in controlling algae. You need to constantly check and maintain your sanitizer level because bacteria enter the pool continuously from many sources. BioGuard offers several chlorine/bromine based sanitizer options including our Mineral Springs® program, or explore our non-chlorine sanitizer program, SoftSwim®.
This is the active chlorine in the water that has not combined with organic matter and is therefore available for killing bacteria and algae. The proper range for free chlorine residual is 1-3 ppm. Below 1 ppm can cause swimmer irritation, cloudy water and even allow algae to grow. You should test often throughout the summer when the pool is used most.
“Shocking” your pool water chemically destroys the organic contaminants introduced by bathers and the environment. They restore water clarity, help maintain water balance and eliminate the main causes of eye and nose irritation.
- Pool Magnet® Plus ties up copper and iron to prevent stains.
- Sparkle-Up® aids in removal of copper and iron from the water.
- Stain Remover removes most stains caused by metals.
- SoftSwim Stain Control ties up metals to prevent stains in SoftSwim pools.
