Spaguard Water Clarifier (1 PT)
Price
SpaGuard Water Clarifier clears cloudy water by combining small particles into larger ones that filter can remove.
Product Information:
Helps clear cloudy water
pH 7.0
Does not effect your spas pH
Combines small particles into larger one for easier filtration
Directions for use:
1. Clean or backwash filter
2. Apply 2 tablespoons (4 capfuls) per 300 gallons directly to spa with pump running
3. If filter pressure reaches manufacturer's maximum recommendations, rinse or backwash filter
4. Repeat in 24 hours if spa water has not cleared
5. For maintenance, apply 1 tablespoon (2 capfuls) per 300 gallons weekly with the pump running
6. Clean filter after each treatment
Note: Do not overdose with this product. Adding more than the recommended amount of product can result in continued clouding of water
For more information on Spa Guard Products, please watch this informational video.
PRODUCT FAQ'S
The force and velocity of aerated water keeps water moving so the filter can remove suspended debris. Circulation also ensures that the chemicals are thoroughly distributed. Dead spots are usually not as prevalent in a spa as they are in a pool.
With the dirt, sweat and oils released in a spa, good filtration is essential. Cartridge filters are the typical choice and because of the increase in the amount of filterable debris, the filter should be regularly cleaned with a garden hose or chemically cleaned at refill.
Cleaning a spa involves several aspects of care, including the removal of obvious debris by skimming or vacuuming, and removal of body oils that are rinsed off bathers. Also, be sure to wipe surfaces after heavy use.
Bacteria and algae grow much faster in a spa than in a pool. As a result, spa owners need to follow a regular and complete chemical treatment routine. Spa chemistry includes water balance, sanitizer and oxidizer applications.
Fewer gallons of water mean changes in water balance happen faster. Add to this the aerated water, increased water temperature, and the heavier bather loads, and it’s easy to see the importance of regular testing. Adjust the balance and sanitizer levels as needed.
Sooner or later, the water reaches a point where it just gets “worn out” from the bather load. When the water looks bad, smells bad, and feels bad it’s time for a change. It is recommended that you drain and refill your spa with fresh water approximately every 3 months.
