Pool Magic Spring & Fall (33.9 oz)
Price
Pool Magic contains a concentrated natural enzyme based formula designed specifically to work in cold water. It quickly breaks down non-living organic contaminants, and cleans up cloudy, dirty pool water.
Typically, you close your pool in the fall with a dose of Pool Magic Spring & Fall. The enzymes control the non-living organics that seep into the water during the off season and minimize the work to re-open or start the pool up. However, if you didn't use Pool Magic Spring & Fall in the fall, you will still benefit by adding it during opening.
- Reduces or eliminates off season waterline ring build-up
- Minimizes or eliminates scrubbing
- Preserves liner and pool finishes
- Reduces the need for acid washing of in-ground pools
Directions for use:
Use entire bottle for pools up to 25,000 gallons (95,000L)
In The Fall
- Follow dealer instructions for closing
- Add Pool Magic Spring & Fall as the last step before covering pool
- Test phosphate levels to ensure levels are near zero
In The Spring
- Bring water level to normal and add any time after shocking and balancing chemicals
Note: Chlorine must be under 5ppm before adding this product
For more information on Natural Chemistry Products, please watch this informational video.
PRODUCT FAQ'S
Yes, you should clean your filter after adding Phosfree and letting the system run continuously for 48 hours (while keeping an eye on filter pressure to ensure it doesn’t rise about 10 psi over start-up). You should also ensure that the filter is clean prior to starting a Phosfree treatment which will allow the product to work more efficiently.
While these products can assist in the stain removal process, they are also need to be used as maintenance treatments. Metals that cannot be fully removed through the filtration system (especially in sand and cartridge filters) are kept in suspension by Metal Free or Scale Free. Calcium molecules are deformed so they can’t stick together to form scale and other metals are kept in solution so they don’t settle back on a surface to cause recurrent staining.
Yes, vacuuming the pool surface thoroughly and cleaning the filter are two very important steps in the stain removal process that cannot be skipped. Cleaning the filter helps to remove some metals from the water. Others that cannot be removed are kept in suspension with maintenance products like Metal Free or Scale Free.
Yes, you can leave Spa Purge in longer than overnight. It needs a minimum of 6 hours for optimum performance so leaving it in longer is not a problem.
For liquids, the large overcap is 4oz and the small threaded cap is ½ an ounce
Phosphates come from a wide variety of sources, some of the most common being:
- Fertilizers (if you have a landscaping service, there is a good chance your pool will have issues with phosphates)
- Many stain & scale products that are sold in the swimming pool industry are phosphonic or phosphoric acid based-while these products do a great job at protecting from stain and scale, they also increase phosphate levels significantly. It is ideal to use a stain & scale control like Metal Free or Scale Free that does not contribute to unwanted phosphate contamination
- Dirt/Dust
- Rain
- Soaps (if one chooses to bathe in a pool, which we hope you do not, it will add phosphates to the water)
- Some cleaning products (ex: many tile cleaners will add to phosphate levels)
