SpaPure Bromine Tablets
Price
SpaPure Brominating Tabs provide a concentrated source of active bromine that is ideal for hot tub sanitizing.
SpaPure Bromine Tablets create a faster bromine residual for spa start-up.
Bromine Tabs dissolve slowly and evenly, and will fit in most spa feeders and floaters to provide continuous sanitation of your spa.
This product will give you the effectiveness of chlorine without the chlorine odor.
Effectiveness of chlorine without the chlorine odor
Directions NEVER mix different products together in the same bottle, pail, or similar container.
Adjust pH of spa water to the range of 7.2-7.6.
If spa is freshly filled and before initially using this product in the spa or hot tub add sodium bromide, according to the label's instructions, to introduce a bromine residual of 2-4 ppm.
Check feeder regularly to ensure that this product is continuously introducing bromine to the water.
When empty or when levels are low, add additional product as necessary to maintain a bromine residual.
To ensure sparkling clean water and that your spa chemicals work effectively, water in spas should be changed every 60-90 days.
Commercial spas should have the water changed every 3 to 5 days.
Do not re-enter spa or hot tub until bromine residual is 4 ppm or less as determined by a bromine test kit.
Ingredients Bromochloro-5, 5-Dimethylhydantoin: 98% Other Ingredients: 2%
For more information on Spa Pure Products, please watch this informational video.
PRODUCT FAQ'S
When it comes to product additions here are some general rules. However, always review and follow label directions for use.
- Items such as SpaPure pH Up, SpaPure pH Down, and SpaPure Hardness Increaser should be added no less than 30 minutes apart.
- Always adjust pH and total alkalinity prior to adding sanitizing and shock products such as SpaPure Chlorinating Granules and SpaPure Spa Oxidizing Shock
- In most cases, "Accessory" items such as SpaPure Natural Clear, SpaPure Defaomer can be added one after another directly to the spa water without impacting performance.
- If the spa was recently superchlorinated or "shocked" with a chlorinating product, hold off adding SpaPure E-Z Enzyme until chlorine levels retreat below 6 ppm.
In short, it all depends on you. The more you use it the more care the water will need. For details, goto our Spa Guide HERE and proceed to Step 3, Routine Care
SpaPure is currently only available to purchase from our Spa Retailer and Service network. Haviland Consumer Products, manufacturer of SpaPure, is currently a buisness-to-buisness enterprise.
Cloudy water is the worst and correcting it can be a challange.
- Correct the pH and total alkalinity. It is unlikly correcting these by themselves will make the water better, but if they remain outside their ideal parameters, it will impact the other products from helping correct the water.
- Make sure the spa is occassionally running and filtering. Spa should run at least 4 hours in total daily.
- Filters should be degreased once a month if the spa is used regularrly (8-12 weeks if using SpaPure EZ Enzyme)
- Ultimatly, water goes cloudy because it lacks enough sanitizer and that is likley because the water is not "shocked" with enough product or not "shocked" frequently enough for as frequently as the spa is being used.
Shocking is the chemical process of removing excess wastes and contaminats in the water. You can simply add more SpaPure Chlorinating Granules to "superchlorinate" the water, but that leads to more chlorine odors, you cannot use the spa as often, shortens the life of the spa cover, and more. If you chose to use chlorine for shock then consider SpaPure Multi Shock Extra. Shocks that are free of chlorine, can actually remove more wastes than chlorine. For a thorough explantion of these type of shocks, THIS technical document can help. Check out our SpaPure Shocks COMPARISION GUIDE putting all of SpaPure shocks side-by-side.
