Baquacil Algicide (1 qt)

Baquacil Algicide (1 qt)

Price

$44.99 $0.00
( / )
BAQUACIL Algicide (1 qt) is great at preventing a wide range of algae and slime. A simple weekly application is all that is needed to keep your water clear. Product Dosage Initial Dose: 5 1/4 fl oz per 10,000 gallons or water. Maintenance Dose: 1 1/4 fl oz per 10,000...
  • 1 QT
Inventory:

20 in stock.

BAQUACIL Algicide (1 qt) is great at preventing a wide range of algae and slime.

A simple weekly application is all that is needed to keep your water clear.

Product Dosage Initial Dose: 5 1/4 fl oz per 10,000 gallons or water.

Maintenance Dose: 1 1/4 fl oz per 10,000 gallons of water.

Directions This product must be added directly into the water with the filter pump running.

Swimming or bathers must wait 15 minutes before re-entry.

Initial Dose: Add 5 1/4 fl oz of Baquacil Algicide per 10,000 gallons of pool water. Initial dose is used when filling pool or upon conversion to Baqaucil.

If pool has visible algae growth treat with initial dose.

Vacuum pool after 24 hours to remove algae debris. If visible algae are still present or reapers, repeat this treatment procedure as necessary.

When pool is free of visible algae, use the recommended maintenance dose.

For persistent algae or slime producing microorganism growth, add 5-7 1/2 ounces of Baquacil Algicide per 10,000 gallons of pool water into the skimmer with the filter pump running. After one minute, shut off pump and allow the system to remain off overnight.

The following day, restart the filter pump add 5-7 1/2 ounces of Baquacil Algicide to the pool.

Run the filter continuously for 24-48 hours, brushing the sides and bottom of the pool frequently.

Maintenance Dose: Add 1 1/3 fl oz per 10,000 gallons of pool water. Maintenance dose should be added weekly.

If high temperatures prevail or pool has unusually heavy use, add maintenance dose more frequently.

Maintenance dose should be added after a heavy or prolonged rainfall. If make-up water is added at a rate of more than 10% per week of pool capacity, add 1/2 fl oz for each 1,000 gallons of fresh make-up water.

Ingredients n-Alkyl (60%, 30% C16, 5% C12 and 5% C18) dimethyl benzyl ammonium chloride: 49.8%, n-Dialkyl (60% C14, 30% C16, 5% C12 and 5% C18) menthyl benzyl ammonium chloride: 0.2%, Other Ingredients: 50%

For more information on Baquacil Products, please watch this informational video.

PRODUCT FAQ'S

The BAQUACIL® CDX® Pool Care System is a complete pool sanitizing system consisting of chlorine-free Swimming Pool Sanitizer & Algistat, Oxidizer, and CDX® oxidizer product. The product that actually kills bacteria in pool water is Swimming Pool Sanitizer & Algistat. The two other products in the system work with this product to keep your pool sparkling clear and algae free.

The active ingredient in Swimming Pool Sanitizer & Algistat is polyhexamethylene biguanide. It's so gentle it is used in some contact lens cleaning solutions and the chemical structure makes it extremely stable. So, unlike some other sanitizers, it is not affected by sunlight, temperature, and pH fluctuations.

Yes, you can use the same balance chemicals if you are on chlorine or the BAQUACIL® Pool Care System.

Basically there are two ways to clean your filter: physically and chemically. Physical cleaning (backwashing, bumping, or hosing off a cartridge) should be done if the pressure on the filter gauge is 8-10 psi above the starting pressure when the filter is clean. A filter should be chemically cleaned at least twice a season (middle and end of season) with BAQUACIL® Universal Filter Cleaner to dislodge any deeply embedded dirt or break up and remove any debris such as grease, oil or scale. If you keep your pool open year round, we suggest you chemically clean your filter three times a year.

For all filters use BAQUACIL® UNIVERSAL FILTER CLEANER.

The BAQUACIL® Pool Care System is different from chlorine and bromine-based pool sanitizers. For that reason, many chemicals that work with one system won't work with the other. The BAQUACIL® CDX® Pool Care System is not compatible with chlorine, bromine, any copper based chemical or non-chlorine shock. Always check with your Authorized BAQUACIL® Dealer before adding supplemental chemicals to your pool.

No, converting your pool to the BAQUACIL® CDX® Pool Care System is a very easy process that usually takes less than 24 hours. Consult your nearest local Authorized BAQUACIL® Dealer and they will instruct you on the proper procedures to start your pool on the BAQUACIL® CDX® Pool Care System. Don't forget to ask about our BAQUACIL® CDX® System Kit — it contains all the products you need to convert your pool to the chlorine-free BAQUACIL® CDX® System.