Natural Chemistry - Spa Chlorine Concentrate 2
Price
Natural Chemistry - Spa Chlorine Concentrate 2#
When used as directed, this product is effective as a spa and hot tub water disinfecting agent.
Ensure all spa and hot tub equipment is working properly. Backwash/clean the filter system following manufacturer's directions. Adjust pH to between 7.2-7.6. When using other products as outlined in the directions for this product, always follow directions on those products.
Maintenance Dose: With pump on, add 1/2 teaspoon of this product per 100 gallons of water (or 5 teaspoons per 1,000 gallons) as an initial treatment. Repeat at 15 to 20 minute intervals until a residual of 3-5 ppm of available chlorine is established as determined by test kit. A test kit must be used regularly to determine the frequency of additional doses of this product needed to maintain the chlorine residual of 3-5 ppm.
Superchlorination: Use one teaspoon of this product per 100 gallons of water (or 1/4 cup per 1,000 gallons). Superchlorination may be needed on a nightly basis in a heavily used spa or as infrequently as once a week in a moderately used spa.
For more information on Natural Chemistry products, please watch this informational video.
PRODUCT FAQ'S
Yes, you should clean your filter after adding Phosfree and letting the system run continuously for 48 hours (while keeping an eye on filter pressure to ensure it doesn’t rise about 10 psi over start-up). You should also ensure that the filter is clean prior to starting a Phosfree treatment which will allow the product to work more efficiently.
While these products can assist in the stain removal process, they are also need to be used as maintenance treatments. Metals that cannot be fully removed through the filtration system (especially in sand and cartridge filters) are kept in suspension by Metal Free or Scale Free. Calcium molecules are deformed so they can’t stick together to form scale and other metals are kept in solution so they don’t settle back on a surface to cause recurrent staining.
Yes, vacuuming the pool surface thoroughly and cleaning the filter are two very important steps in the stain removal process that cannot be skipped. Cleaning the filter helps to remove some metals from the water. Others that cannot be removed are kept in suspension with maintenance products like Metal Free or Scale Free.
Yes, you can leave Spa Purge in longer than overnight. It needs a minimum of 6 hours for optimum performance so leaving it in longer is not a problem.
For liquids, the large overcap is 4oz and the small threaded cap is ½ an ounce
For liquids, the large overcap is 4oz and the small threaded cap is ½ an ounce
