Poolife Instant Clear Cleaning Granules Stabilized Chlorinator (35 lb)

Poolife Instant Clear Cleaning Granules Stabilized Chlorinator (35 lb)

Price

$239.99 $0.00
( / )
DESCRIPTION Poolife Instant Clear Cleaning Granules are an effective stabilized chlorine granules used to control algae, kill bacteria and destroy organic materials. This product can be used as a daily chlorine addition and/or as a pool shock. DOSAGE MAINTENANCE DOSE: 3-5 ounces per 10,000 gallons of water every other day...
  • 35 LB
Inventory:

10 in stock.

DESCRIPTION

Poolife Instant Clear Cleaning Granules are an effective stabilized chlorine granules used to control algae, kill bacteria and destroy organic materials. This product can be used as a daily chlorine addition and/or as a pool shock.

DOSAGE

MAINTENANCE DOSE:

3-5 ounces per 10,000 gallons of water every other day or as needed to maintain chlorine residual of 1-4 ppm.

SHOCK TREATMENT/SUPER CHLORINATION:

12-24 ounces per 10,000 gallons of water every week.

DIRECTIONS

Add the recommended dosage of this product directly to the pool during then evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use only a clean, dry scoop to measure this product. Do not use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.

WATER BALANCE:

For best product performance, swimmer comfort, and crystal clear water. Maintain pH in the range of 7.2 to 7.6. Maintain Pool Alkalinity in the range of 80 to 120 ppm. Maintain calcium hardness above 200 ppm. Use a reliable test kit that measures all these ranges. Use Poolife pool care products to make adjustments. Follow label directions for each product.

OPENING YOUR POOL:

For best results, see "Water Balance" section above before treatment. Throughout the pool season, adjust and maintain pH at 7.2 to 7.6. Check available chlorine with a suitable test kit. Do not reenter pool until the free available chlorine residual is 1.4 ppm/ Repeat treatment as needed. Add 3-5 ounces of this product per 10,000 gallons of pool water every other day or as often as needed to maintain 1-4 ppm free available chlorine.

SHOCK TREATMENT/SUPER-CHLORINATION:

For best results, see "Water Balance" and "How To Use" sections above before treatment. Every 7 days, or as necessary to prevent pool problems, shock treat the pool by adding 12-24 ounces of this product per 10,000 gallons of water to provide 5-10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit. Do Not reenter the swimming pool until the free available chlorine residual is 1-4 ppm.

INGREDIENTS

Sodium Dichloro-s-Triazinetrione: 99%, Other Ingredients: 1%, Available Chlorine: 56%

For more information on Pool Life products, please watch this informational video.

PRODUCT FAQ'S

Algae are microscopic plants that grow in water. They are usually green, but can also be blue-green, black, yellow or mustard. Algae can grow on the pool surface or float in the water. Algae can turn pool water green, which can literally happen overnight.

 You need to shock your pool water when opening and closing your pool. You should also shock treat weekly during the pool season to kill bacteria and algae and remove contaminants. We recommend shocking at the same time and on the same day each week. The optimum time to shock your pool is sundown. At this time of the day, the chlorine can work without fighting the sun’s ultraviolet rays. The pool should be left uncovered after shocking the pool. Shocking after sundown also gives chlorine more time to restore the water clarity.

If this happens, use Poolife® Back to Blue® Shock System, which can restore water clarity in 24 hours. To treat common algae like green and yellow, use Poolife® Algae Bomb® 30, Poolife® Defend+® or Poolife® Super Algae Bomb® 60 algaecides, which, when used in conjunction with a Poolife® shock product, cleans up both green and yellow algae. Mustard and black algae are more difficult to remove, so we recommend using Poolife® Mustard Algae Treatment product or Poolife® AlgaeKill II product. Poolife® has additional algaecides to address other specific needs. Always follow product label directions carefully.

The build-up of cyanuric acid in swimming pool water resulting from the use of stabilized sanitizers in conjunction with stabilized shock products. • Overstabilization will significantly decrease the effectiveness of chlorine in killing bacteria and algae. • Small levels of cyanuric acid (20–50 ppm) do serve a purpose in protecting chlorine from sunlight degradation. However, too much will negate any benefit and cause problems. • Calcium Hypochlorite-based shock products such as Poolife® TurboShock® , and Poolife® Rapid Shock® shock treatments will not increase the stabilizer level in your pool.

 Always add stabilizer before adding Poolife® chlorinators. The stabilizer must be added slowly through the skimmer while the pump is operating.Allow at least 48 hours for the stabilizer to dissolve before backwashing or cleaning the filter.

 The cyanuric acid level and the climate determine whether you need to add stabilizer to your pool. You should take a sample of your pool water to your Authorized Poolife® Dealer for a detailed analysis and recommendation or you can use test strips to determine the stabilizer level. When opening your pool, if you choose to use stabilizer, the stabilizer level should be 20–50 ppm. During the swimming season, the ideal stabilizer level should be maintained between 20–50 ppm. Chlorine isn’t as effective if the stabilizer level rises above 90 ppm. Remember some chlorinators add stabilizer as the chlorine dissolves into the water.