SpaPure Clarifier
Price
The SpaPure Clarifier is a liquid formula that is designed to increase filter efficiency.
This product combines together microscopic particles to create larger particles.
These larger particles are then easier to remove from the water through the filter.
SpaPure Clarifier can be used in your weekly routine to maintain the water at its best or you can use it clarify your spa when it gets dull or cloudy.
This product is compatible with chlorine, bromine, and biguanide sanitizing systems.
Concentrated clarifier that clears up cloudy water
Can be used routinely, or as needed in chlorine, bromine, or biguanide based spas
Directions NEVER mix different products in the same bottle or pail.
Add this product directly to the spa water. 1 capful = 1/2 ounce, 2 capfuls = 1 ounce.
Weekly Maintenance Program: Turn on circulation system. Add 2 ounces per 500 gallons directly to the spa water.
Spa may be used after application.
Continue to circulate water 30 minutes after application.
Cloudy Water Aid: Clean filter.
See your dealer for cleaning instructions particular to your water and spa.
Turn on circulation system.
Add 4 ounces per 500 gallons directly to the spa water.
Repeat after 24 hours if water has still not cleared.
For more information on Spa Pure Products, please watch this informational video.
PRODUCT FAQ'S
When it comes to product additions here are some general rules. However, always review and follow label directions for use.
- Items such as SpaPure pH Up, SpaPure pH Down, and SpaPure Hardness Increaser should be added no less than 30 minutes apart.
- Always adjust pH and total alkalinity prior to adding sanitizing and shock products such as SpaPure Chlorinating Granules and SpaPure Spa Oxidizing Shock
- In most cases, "Accessory" items such as SpaPure Natural Clear, SpaPure Defaomer can be added one after another directly to the spa water without impacting performance.
- If the spa was recently superchlorinated or "shocked" with a chlorinating product, hold off adding SpaPure E-Z Enzyme until chlorine levels retreat below 6 ppm.
In short, it all depends on you. The more you use it the more care the water will need. For details, goto our Spa Guide HERE and proceed to Step 3, Routine Care
SpaPure is currently only available to purchase from our Spa Retailer and Service network. Haviland Consumer Products, manufacturer of SpaPure, is currently a buisness-to-buisness enterprise.
Cloudy water is the worst and correcting it can be a challange.
- Correct the pH and total alkalinity. It is unlikly correcting these by themselves will make the water better, but if they remain outside their ideal parameters, it will impact the other products from helping correct the water.
- Make sure the spa is occassionally running and filtering. Spa should run at least 4 hours in total daily.
- Filters should be degreased once a month if the spa is used regularrly (8-12 weeks if using SpaPure EZ Enzyme)
- Ultimatly, water goes cloudy because it lacks enough sanitizer and that is likley because the water is not "shocked" with enough product or not "shocked" frequently enough for as frequently as the spa is being used.
Shocking is the chemical process of removing excess wastes and contaminats in the water. You can simply add more SpaPure Chlorinating Granules to "superchlorinate" the water, but that leads to more chlorine odors, you cannot use the spa as often, shortens the life of the spa cover, and more. If you chose to use chlorine for shock then consider SpaPure Multi Shock Extra. Shocks that are free of chlorine, can actually remove more wastes than chlorine. For a thorough explantion of these type of shocks, THIS technical document can help. Check out our SpaPure Shocks COMPARISION GUIDE putting all of SpaPure shocks side-by-side.
